From ldv.com:

We recently completed this mobile command center for the City of Naperville in Illinois. The vehicle features a Freightliner M2 106 conventional single rear axle chassis with a 33,000 GVWR, Cummins L9 360HP diesel engine and an Allison 3000 EVS automatic transmission. The all aluminum body of the command center features two in-house fabricated flat floor slide-outs and our Intel-I-Touch™ vehicle automation system. We added an exterior charging station, exterior workstation and our Extreme Duty body storage compartments to the vehicle as well. A non locking rear pneumatic mast was added with perimeter surveillance camera equipment. To stabilize the command center on scene, a vehicle leveling system is installed. A TriMark keyless entry system has also been installed with remote radio frequency (RF) transmitter fob. Whelen emergency and scene lighting has also been installed to the exterior. A custom pull out aluminum stair cassette has been added for entry into the vehicle.

Inside, the command center has a front work area with two sets of café-style seating. The seats are fixed and made in house for staff. We added magnetic surface dry erase white boards to the side walls. We wall mounted a 55? high resolution display monitor to the front wall. Two additional 32? monitors have been added to the front area as well. The center of the vehicle has a large electronics rack and a closet with adjustable shelving. Magnetic soft close pocket doors are utilized for privacy.

The rear conference room has a center table with six spider base task chairs. Two additional workstations are included in the curbside rear slide out. A large 65? high resolution display monitor is wall mounted to the streetside wall. A 55? Vibe smartboard with conferencing camera is wall mounted to the rear wall.

The HVAC system consists of three ducted low profile rooftop A/C units with wall thermostat and two direct discharge diesel-fired furnaces. A poweful 20kW liquid cooled diesel generator supplies plenty of electric power to the command center. A full vehicle surge suppression system has been installed to protect all of the installed electronics. A Will-Burt Night Scan LED telescoping light tower is also installed. Four perimeter IP cameras are installed for surveillance. An Extron 4K 16×8 video matrix switcher handles all of the video sources.

#chicagoareafire.com; #LDV; #MobileCommandCenter; #Naperville; #FreightlinerM2106;

LDV photo

#chicagoareafire.com; #LDV; #MobileCommandCenter; #Naperville; #FreightlinerM2106;

LDV photo

#chicagoareafire.com; #LDV; #MobileCommandCenter; #Naperville; #FreightlinerM2106;

LDV photo

#chicagoareafire.com; #LDV; #MobileCommandCenter; #Naperville; #FreightlinerM2106;

LDV photo

#chicagoareafire.com; #LDV; #MobileCommandCenter; #Naperville; #FreightlinerM2106;

LDV photo

Vehicle Details

  • Freightliner M2 106 conventional single axle chassis
  • Cummins L9 diesel engine
  • Allison 3000EVS automatic transmission
  • (2) In-house fabricated flat floor slide outs
  • Weatherproof exterior workstation
  • Electronics charging station
  • Vehicle leveling system
  • Intel-I-Touch™ vehicle automation system
  • Extreme Duty body storage compartments
  • Non-locking rear pneumatic mast with perimeter surveillance cameras (2)
  • (4) Perimeter IP surveillance cameras on the body
  • 16×8 Extron video matrix switcher
  • TriMark keyless entry system
  • (8) Spider base task chairs
  • Fixed bench seating
  • Vibe collaboration monitor with conferencing camera
  • Pull out aluminum stair cassette at entry door
  • Café-style workstations in front room
  • Large electronics rack
  • Magnetic soft close pocket doors
  • Magnetic surface dry erase white boards
  • LED scene lighting
  • Complete emergency lighting and siren package
  • Prewired for communications radios

thanks Keith

Tags: , , ,