Posts Tagged Seagrave PB model engine

New engine for York Center

Engine 75 at the York Center FPD has been added to the site. This now completes the transition to an all-Pierce department for custom apparatus.

York Center Fire Protection District  Engine 75

The 2012 Pierce replaces a 1993 E-ONE Hush.

York Center Fire Protection District

The E-ONE Hush was originally white over lime green.

York Center Fire Protection District fire engine

York Center Engine 75 was delivered as seen here. Larry Shapiro photo

The 1993 Hush replaced a Seagrave PB Series engine.

York Center Fire Protection District Seagrave engine

Two generations back, York Center Engine 75 was this 1973 Seagrave PB Series engine. Larry Shapiro photo

Robbins Fire Department 1973 Seagrave engine formerly from York Center FPD

Robbins Fire Department Engine 2943 was a 1973 Seagrave 1250/5000) that formerly belonged to the York Center FPD. Bill Friedrich photo

 

Tags: , , , , , , , , , , ,

The color of fire trucks (part 10) Division 10

Departments in MABAS Division 10 are featured in this next installment of The Color of Fire Trucks series.

Clarendon Hills Fire Department Mack Pierce TeleSqurt

Clarendon Hills ran this 1986 50′ TeleSqurt built by Pierce on a Mack CF chassis. Engine 349 had a 1,500-GPM pump and carried 500 gallons of water. Larry Shapiro photo

The Clarendon Hills Fire Department runs with apparatus that is painted white over a bright yellow. They currently have a fleet of four units with these colors.

Darien-Woodridge Fire Protection District engine

One of several E-ONE units purchased by the Darien-Woodridge FPD was this 1990 top-mount Hurricane engine with 1,000 gallons of water and a 1,500-GPM pump. It ran as Engine 371. Larry Shapiro photo

The Darien-Woodridge Fire Protection District currently runs with red and white apparatus. Their newest unit is solid red, and with this purchase they will retire one of the last of their lime-green apparatus which dominated their fleet for many years.

Riverside Fire Department green fire engine

Riverside Engine 306 ran with this 1978 Ford C-8000/Seagrave. It had a 1,250-GPM pump and 750 gallons of water. Bill Friedrich photo

The Riverside FD had this Seagrave engine and they also purchased another lime green rig. The second unit was a Chevy/E-ONE (DOT) light rescue, like the one shown below from Forest View.
Forest View Fire Department EONE small rescue

Forest View ran with one of the popular small DOT spec rescue squads like many other area departments. Squad 816 was built by E-ONE in 1980 on a GMC chassis. Bill Friedrich photo

The Forest View FD purchased this (DOT) light rescue. It was the only non-red rig in the fleet.
Hinsdale Fire Department EONE engine painted black and yellow

One of many units that has been purchased over the years for service in Hinsdale was this 1982 E-ONE Protector IV engine. Running as Engine 343, it was built on a Hendrickson chassis with an 1871-W cab, and carried 500 gallons of water with a 1,250-GPM pump. Larry Shapiro photo

Until 2008, all of the apparatus in the Hinsdale Fire Department was delivered black over yellow, and with the exception of their 2008 Spartan/Rosenbauer/Metz tower ladder, everything still maintains these colors.
Westmont Fire Department Pemfab Wedge engine by FTI

The Westmont Fire Department purchased this white and lime engine from FTI in 1978. It featured a 1,250-GPM pump with 500 gallons of water. It was built on a Pemfab chassis with their ‘wedge’ (Model 932-T) cab. Bill Friedrich photo

Westmont’s Fire Department had only this one non-red rig in the fleet.
Willow Springs Fire Department black E-ONE tower ladder

Willow Springs purchased this unusual 95′ tower ladder from E-ONE in 2001. Painted black, tower 600 had a 1,500-GPM pump with 300 gallons of water on a Cyclone chassis. Bill Friedrich photo

Willow Springs had this unique E-ONE tower ladder that was black. Reportedly, a developer was to build a large project in Willow Springs and was required to purchase an aerial unit for the fire department. The developer insisted on the tower being painted black.
Argonne national Laboratory Fire Department

The Argonne Labs Fire Department put together this brush rig with a 1975 IHC pickup. Brush 75 had a 70-GPM pump and a 250-gallon water tank. Bill Friedrich photo

Argonne Laboratory FD built their own brush truck. It was the only non-red in the fleet.
Western Springs Fire Department Pierce Arrow engine white fire truck

One of the many units that saw service in Western Springs when their apparatus was painted white was this 1981 Pierce Arrow engine. It was one of the early Pierce Arrow models with a chassis that was made by Oshkosh. Engine 437 had a 1,500-GPM pump with 750 gallons of water. The top-mount control station featured a hand-rail due to the large and spacious area.At this point in time, Pierce was building the cab and body. It wasn’t until later that they began to assemble the entire chassis. Larry Shapiro photo

The current Western Springs Fire Department apparatus is red and white although previously their units were all white with blue and gold trim.
Romeoville Fire Department white rescue squad

The only unit that the Romeoville Fire Department has run with that was not red was this 1979 E-ONE (DOT) light-duty rescue on a Ford F-350 chassis. Perhaps what is most unusual about this is that these were normally delivered lime green. Bill Friedrich photo

Romeoville had a white light-duty rescue by E-ONE. Most of these units were delivered lime green as per the DOT spec.

McCook Fire Department yellow Seagrave engine

This was one of two Seagrave engines that was purchased by the McCook Fire Department and was painted yellow. Engine 379, built in 1979, had 500 gallons of water with a 1,250-GPM pump. Bill Friedrich photo

Many years ago, the McCook Fire Department had red apparatus, then they switched to bright yellow for several years before the fleet was changed again to red and white.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

The color of fire trucks (part 4)

The next installment in this series about Chicago area fire trucks looks into departments in MABAS Division 3 that over the years have changed over to red fire apparatus. Also highlighted is a department that was always red but at one time had an engine that was a different color.

Deerfield had two Ward LaFrance P80 series engines with the Ambassador cab. Engine 720 was delivered in 1973 with a 1,250-GPM pump and Engine 712 came in 1977. Engine 720 carried 750 gallons of water , Engine 712 carried 1,000 gallons, and both were painted white over lime green.

Deerfield-Bannockburn Fire Department 1977 Ward LaFrance Ambassador engine

Deerfield Engine 712 was a 1977 Ward LaFrance P80 with an Ambassador cab. It had a 1,500-GPM pump with 1,000 gallons of water. Larry Shapiro collection

The Glenbrook Fire Protection District (formerly the Glenview Rural Fire Protection District) merged with the Glenview Fire Department in 1992. The original Glenview Rural trucks were red, then sometime after the district name changed  the Glenbrook apparatus was transitioned to yellow. Subsequent purchases arrived yellow. The department had three American LaFrance Pioneer Series engines, one of which was a newer Pioneer II model. They also had a small squad and a 1968 Ford/Snorkel. The red 75-foot Snorkel was refurbished in 1986 and came back yellow from Pierce with a new four-door Arrow cab. Later they purchased a newer squad from Hackney and two Pierce Arrow engines.

Glenbrook Fire Protection District Engine 144 1976 American LaFrance Pioneer

Glenbrook Engine 144 was a 1976 Pioneer Series from American LaFrance with 750 gallons of water and a 1,250-GPM pump. Larry Shapiro collection

Glenview apparatus has always been red. In 1975, they purchased a pumper-squad from Seagrave with a 300-gallon water tank. Squad 8 came white over lime green. This unit was later repainted red but retained the white roof.

Glenview Fire Department 1975 Seagrave PB series pumper squad

Glenview had this one unit that was not painted red. Pumper-Squad 8 was a 1975 Seagrave P-Series with 300 gallons of water and a 1,500-GPM pump. Larry Shapiro collection

For many years, Northbrook painted their units yellow, having previously been red. They had three engines, a Sutphen tower ladder, two squad units, and utility vehicles that were yellow. They also had a matching yellow stripe on their modular ambulances. The apparatus changed to white over red in 1996 when they received two engines, a squad, and a ladder from Pierce.

Northbrook Fire Department Engine 58 1975 American LaFrance Pacemaker

Northbrook Engine 58 was a 1975 American LaFrance Pacemaker Series engine with 500 gallons of water and a 1,000-GPM pump. The Pacemaker was a conventional custom fire cab by TCM instead of an American LaFrance custom Century or Pioneer cab. Larry Shapiro collection

The Park Ridge Fire Department ran with white over lime green apparatus for many years. Including this conventional Pirsch engine, they had a Mack CF/Pirsch mid-mount ladder, a custom cab-over Pirsch engine, and two Seagrave WB Series low profile engines that were painted to match. They also had stripes on their modular ambulances that matched the apparatus. All but the mid-mount ladder were later repainted red.

Park Ridge 1958 conventional Pirsch fire engine

Park Ridge Engine 44 shown here at a fire scene, was a 1958 conventional cab Pirsch with 500 gallons of water and a 1,000-GPM pump. Steve Redick collection

To see the earlier posts in this series, enter the word color into the search field.

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , ,

The color of fire trucks (part 2)

Last week’s posting HERE about different colors for fire apparatus mentioned area departments that have apparatus that is not red (or red & white or red & black). Several departments have switched from other colors to red, and several readers pointed out that some still have rigs with the old colors.

This is the first in a series of postings that will highlight the departments that have switched or might have had a unit in the past that was a different color than the rest of the fleet.

Division 1:

Arlington Heights once purchased a Mack CF engine that was a demo and came white over lime green.

Arlington Heights Fire Department 1975 Mack CF engine

Arlington Heights Engine 411 was a 1975 Mack CF engine with a 1,500-GPM pump and 500 gallons of water. Larry Shapiro collection

Elk Grove Village had a lime green Mack CF engine.

Elk Grove Village Fire Department Engine 118 1977 Mack CF

Elk Grove Village once owned this 1977 Mack engine with a CF600 chassis. It carried 700 gallons of water with a 1,250-GPM pump. Larry Shapiro collection

Mt. Prospect used to paint their fleet white over yellow. Over the years, this included at least five engines and two mid-ship mounted aerials.

Mount Prospect Fire Department 1975 Pierce engine Hendrickson

Mount Prospect had two engines with the Hendrickson 1871-S cab. One was built by Boyer, and this engine was built by Pierce with a 1,000-GPM pump and 500-gallon water tank. Larry Shapiro collection

Palatine had a white over lime green Seagrave engine.

Palatine Fire Department 1973 Seagrave PB-Model engine

Palatine had this one 1973 Seagrave Model PB engine with a 1,500-GPM pump and 500 gallons of water. Larry Shapiro collection

Rolling Meadows had two units that were white over lime green. In addition to this Pierce, they had a medium-duty squad with a PTO pump built by E-ONE on a GMC chassis.

Rolling Meadows Fire Department 1979 Pierce Suburban engine

Rolling Meadows ran with this 1979 Pierce Suburban engine that was built on a Ford L9000 chassis. Engine 612 carried 500 gallons of water and had a 1,250-GPM pump. Larry Shapiro collection

Wheeling apparatus used to be white over lime green. From the late 1960s when Ward LaFrance pioneered the push to painting apparatus lime green through the purchase of the 1994 Sutphen tower ladder that is currently being used, all Wheeling units had this color scheme.

Wheeling Fire Department Ward LaFrance P80 Ambassador engine

Wheeling purchased two Model P80 engines from Ward LaFrance on Ambassador chassis. In addition to this 1969 unit, they purchased a second engine in 1971. Engine 1 had a 1,250-GPM pump, 500 gallons of water, and a mid-ship elevating platform with a pre-piped deluge gun. Larry Shapiro collection

And here’s one last image to show the Palm Beach Gardens green that was referred to in the article from the Wall Street Journal.

 

Palm Beach Gardens Fire Department Rescue Engine 5 Pierce Arrow

Palm Beach Gardens Engine 5 shown here as a 1999 Pierce Arrow with a 1,250-GPM pump and 750 gallons of water. This was formerly built in 1990 on a Pierce Javelin chassis. Larry Shapiro collection

 

Tags: , , , , , , , , , , , , , , , , , , ,